AP Silage cutters – type NT

Series NT

The robust silage blockcutter in the NT series lends itself perfectly for use to wheel loaders, heavy telescopic handlers and in the three-point / lifting mast of heavier tractors. Block widths from 180 to 260 cm, the block depth is 106 cm and the block height is 102 cm. The capacity varies from 1,90 to 2,80 m³.

This very solid machine is equipped with heavy Kverneland tines ø 55 mm.
All models are available with tines as well with a closed bottom and are standardly delivered with hoses and quick couplings. The cutting frame and the closed bottom are double-walled. This sandwich construction is provided with reinforcements so that the silage cutter is very “stiff” in the frame. Thanks to this stiff construction the cutting frame will not twist and the AP silage cutter requires only 2 cylinders. Therefore there is no need for a hydraulic flow divider.

Technical specifications series NT

TypeBlock width
cm
Block depth
cm
Block height
cm
Block capacity
Weight kg
shear grab
Weight kg
shear bucket (DB)
NT 18001801061021,912151335
NT 20002001061022,113501470
NT 22002201061022,314851605
NT 24002401061022,5516201740
NT 26002601061022,817551872

• Standardly equipped with hydraulic hoses and ½” male BSP couplings
• Necessary hydraulic power : 50 l./min. – 180 bar (max. 80 l./min. – 200 bar)


Options series NT

  • Hydraulic push-off system
  • Inlay in conjunction with hydraulic push-off system
  • Electric hydraulic control
  • Pressure safety valve
  • All common quick attachments

 

Hydraulic push-off system (HAT)

The hydraulic push-off system makes the unloading of silage or corn blocks easier if the cutter, for whatever reason, has difficulty tipping. The push-off system is only available for the AP silage cutters with tines (shear grabs) en requires the use of an extra double functioning valve or electric control 2 functions (VS2).


Inlay in conjunction with hydraulic push-off system (HAIBT)

As supplement to the hydraulic push-off system a (removable) inlay can be added. This inlay can be drawn into the cutter or put away by the push-off system so the driver does not have to leave the cabine. The inlay is provided with hooks and the push-off system with catch hooks. Once the inlay is within the silage blockcutter the cutting frame can be closed. Due to this, spilling is reduced to a minimum.

 

 

 

Pictures